Polo Shirt Mould 3D Matte Curve Silicone Labels

Polo Shirt Mould 3D Matte Curve Silicone Labels

Matte curve effect high build silicone heat transfer sticker is done by copper or aluminum metal mould. The advantages for mould heat transfer is that it can customized thickness up to 5mm which is much better for high build silicone labels production than screen printing. On the other hand, its available to make line or other texture surface by mould in which it would confirm all quality in same level.

Send InquiryChat Now
Product Details

OVERVIEW

Matte curve effect high build silicone heat transfer sticker is done by copper or aluminum metal mould. The advantages for mould heat transfer is that it can customized thickness up to 5mm which is much better for high build silicone labels production than screen printing. On the other hand, its available to make line or other texture surface by mould in which it would confirm all quality in same level.

Heat press temperature: 160~170 degree, 15 seconds.


TYPICAL PROPERTY

Code NO.

T-series

Color

Customized colors

Durometer - Shore A

33 Shore A

Dynamic Viscosity

300000 Centipoise

Elongation

562 %

Pot Life


Shelf Life

180 Days

Solids Content

> 98 %

Specific Gravity @ 25C

0.95

Tear Strength

4.3Mpa

Tensile Strength

1015.3 psi


PRODUCT DISPLAY

image001(001).jpg


FAQ

1.What is your MOQ?

3000 pieces as a MOQ, but special request we can discuss for different request.

2.How is the washing resistance?

45minutes, 45 degree, washing 10 times.

3.Where is your main market?

Different area and district which has factory of garment, shoes and fabrics related products.

4.What is your lead time?

Normally in 3~15 days according to order quantity.

5.What is your payment payment ?

T/T, Western Union, PayPal


How to make mould silicone heat transfer labels?

Items:

Copper mould or aluminum mould

High density silicone T-J05 or other clear base

Cross linker: T-90F (Different)

Heat transfer glue: G-60


Mould positioning film

1. Prepare mould

2. Mixed clear high density T-J05 or round silicone T-J02 with color Pigments to get color effect, filling in the mould and then vacuum the bubble out until the silicone is filled with all mould logos.

3. Mixed cross linker T-90FA:T-90FB=1:1, Then brush 3-4 layers. Every layer surface cure

4. Print glue G-60 directly on top. 3-4 layers. Every layer surface cure

image001_副本.jpg   ④ Transfer Glue(3-4 layers)

image002_副本.jpg   ③ Cross linker (3-4 layers)

image003_副本.jpg   ② HD silicone T-J05 (raise thickness)

image004_副本.jpg   ① Color silicone(2-3 layers)

image006_副本.jpg   Metal mould


Hot Tags: polo shirt mould 3D matte curve silicone labels, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US