Glossy Heat Transfer Silicone

This silicone is used for glossy top printing to get super shiny effect. Its in two-component which mixed with 2%-5% catalyst. After finished glossy printing, we need to leave some time for bubble out, this is why its hard to people to get curve glossy effect without bubble. Heat too urgent or leave no enough time for bubble out, it would show easily in silicone with bubble. This silicone bubble would disappear within 20 seconds which is much better for machine production.

Send InquiryChat Now
Product Details

OVERVIEW

This silicone is used for glossy top printing to get super shiny effect. Its in two-component which mixed with 2%-5% catalyst. After finished glossy printing, we need to leave some time for bubble out, this is why its hard to people to get curve glossy effect without bubble. Heat too urgent or leave no enough time for bubble out, it would show easily in silicone with bubble. This silicone bubble would disappear within 20 seconds which is much better for machine production.


TYPICAL PROPERTY

Code NO.

T-J04

Color

Transparent

Durometer - Shore A

31 Shore A

Dynamic Viscosity

200000 Centipoise

Elongation

520 %

Pot Life

72 hours

Shelf Life

360 Days

Solids Content

> 98 %

Specific Gravity @ 25C

0.95

Tear Strength

4.1Mpa

Tensile Strength

1015.3 psi


PACKING  

5kg/barrel; 20kg/barrel


CLEANING

After printing, silicone ink can be cleaned away from equipment with hydrocarbon based solvent.


PRODUCT DISPLAY

image001_副本.jpg


Heat Transfer silicone printing process:

Positive heat transfer(General steps)

Items:

Positive PET film (different one from the first method)

High density silicone T-J05 or other clear base

Matte silicone T-JM02/ Glossy silicone T-J03

Cross linker: T-90Z(Different)

Heat transfer glue: G-60


Mould sticky film

1. Prepare PET film

2. Print heat transfer glue G-60 3-4 layers( every layer surface cure)

3. Mix T-90ZA:B=1:1, then print 3-4 layers (every layer surface cure)

4. Mix HD silicone with pigment then print to the thickness you request (every layer surface cure)

5. Print glossy silicone or matte silicone on top to get super matte or shiny effect.

6. Use mold sticky film to attached the labels off from PET film

image002_副本.jpg   ④ color silicone

image003_副本.jpg   ① high density silicone

                                                                       ② crosser linker T-90Z

image004_副本.jpg   ① Transfer glue G-60

image006_副本.jpg   PET-Film


Heating process:

1.After finishing printing, put the labels in oven and heat under 150-160 degree for 45-60 minutes.

2.When heat press on fabrics, heat press under 160 degree both sides and then cold-peel.


Hot Tags: glossy heat transfer silicone, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US