Matte Heat Transfer Silicone

Matte Heat Transfer Silicone

This silicone is used for matte top printing for matte effect. It’s not suitable to be printed directly on fabrics. It can be applied on automatic screen printing production mixed with 2% catalyst with long working time. Super soft hand-feel you will always like it.

Send InquiryChat Now
Product Details

OVERVIEW

This silicone is used for matte top printing for matte effect. It’s not suitable to be printed directly on fabrics. It can be applied on automatic screen printing production mixed with 2% catalyst with long working time. Super soft hand-feel you will always like it.

 

TYPICAL PROPERTY

Code NO.

T-M02

Color

Transparent

Durometer - Shore A

17 Shore A

Dynamic Viscosity

100000 Centipoise

Elongation

566 %

Pot Life

72 hours

Shelf Life

360 Days

Solids Content

> 98 %

Specific Gravity @ 25C

0.95

Tear Strength

2.3Mpa

Tensile Strength

1015.3 psi

 

AFTER SALES

1. All silicone base is mixed with 2-5% catalyst, too few or too much would affect the curing of silicone.

2. Our silicone base can be mixed in proper rate to improve related functions.

3. The order we delivered if its not match your request, pls keep it sealed well for replacement.

4. Curing temperature of silicone is 100-120 degree. Silicone need to be flash cure before another layer.

5. Two way to get matte effect, print matte on top, or use very thin mesh to print high density silicone layer by layer.

 

How to make high build silicone heat transfer stickers?

1. Prepare glossy or matte PET film.

2. Mixed clear high density T-J05 or round silicone T-J02 with color Pigments to get color effect, print 2-3 layers, every layer surface cure

3. To Raise thickness, we print high density silicone clear after colors, layers depend on the thickness you request. Or we can raise thickness by color silicone directly

4. Mixed cross linker T-90FA:T-90FB=1:1, Then print 3-4 layers. Every layer surface cure

5. Print glue G-60 directly on top. 3-4 layers. Every layer surface cure 

image001_副本.jpg   ④ Transfer Glue(3-4 layers)

image002_副本.jpg   ③ Cross linker (3-4 layers)

image003_副本.jpg   ② HD silicone T-J05 (raise thickness)

image004_副本.jpg   ① Color silicone(2-3 layers)

image006_副本.jpg   PET-Film( glossy or matte)


Heating process:

1. After finishing printing, put the labels in oven and heat under 150-160 degree for 45-60 minutes.

2. When heat press on fabrics, heat press under 160 degree both sides and then cold-peel.

image007.jpg


Hot Tags: matte heat transfer silicone, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US