Golf Gloves Two-component Non-slip Silicone

Golf Gloves Two-component Non-slip Silicone

Two-component liquid silicone rubber used for winter gloves printing, Round glossy effect with anti-slip effect. It can also be applied on golf gloves and goal keeper sport gloves screen printing. This kind of silicone can be printed directly on fabrics to get non-slip effect for dot or lines. If you need more glossy effect, you can apply our glossy silicone on top to get super shiny effect.

Send InquiryChat Now
Product Details

OVERVIEW

Two-component liquid silicone rubber used for winter gloves printing, Round glossy effect with anti-slip effect. It can also be applied on golf gloves and goal keeper sport gloves screen printing. This kind of silicone can be printed directly on fabrics to get non-slip effect for dot or lines. If you need more glossy effect, you can apply our glossy silicone on top to get super shiny effect.


TYPICAL PROPERTY

Code NO.

T-JH

Color

Transparent

Durometer - Shore A

33 Shore A

Dynamic Viscosity

300000 Centipoise

Elongation

462 %

Pot Life

72 hours

Shelf Life

360 Days

Solids Content

> 98 %

Specific Gravity @ 25C

0.95

Tear Strength

4.3Mpa

Tensile Strength

1015.3 psi


PACKING  

5kg/barrel; 20kg/barrel


CLEANING

After printing, silicone can be cleaned away from equipment with hydrocarbon based solvent.


PRODUCT DISPLAY

image001.jpg


FAQ

1.What is your MOQ?

Sample trial depend on customers, but for bulk order, MOQ should be 400kgs.

2.Are you manufactuer or trading company?

We are silicone ink and silicone heat transfer labels manufacturer, but we also do some trading according to customers trust.

3.Where is your main market?

Our main market based in Asian and south America countries where there are more printing factory for garments or shoes.

4.What is your lead time?

Normally in 3~15 days according to order quantity.

5.What is your payment term?

T/T, Western Union, PayPal


AFTER SALES

1. Mixing rate of catalyst is 2%, flash cure every layer before printing another layer. The more catalyst you add, the faster the silicone cure.

2. Heating temperature of our silicone is 100-120 degree, 3-5 minutes.

3. The order we delivered if it is not match your request, pls keep it sealed well for replacement.


TRIANGLE SILICONE PRINTING SOLUTION

Why sometime silicone printing surface is sticky ?

Usually, there are three reasons to cause the sticky surface:1.Catalyst is nor enough, so it is cured not completely. 2. The dye in dark fabrics is not eco-friendly, it would affect the curing of catalyst. 3. Some foam fabrics cause curing problem of catalyst.


Hot Tags: golf gloves two-component non-slip silicone, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US