Manual Hand-printing Fiber-press Silicone Ink

Manual Hand-printing Fiber-press Silicone Ink

Fiber-press silicone, two-component with mixing rate of catalyst 2%. Low viscosity which can cover the fiber on cotton fleece fabrics to make printing surface super smooth. Some knitted fabrics always appear long fiber on surface. Silicone is much steady than waterbase rubber ink or plastisol ink after curing. So, if the first layer, fiber is not covered well, then it would appear on final printing. So, fiber press silicone is coming out for this special fabrics.

Send InquiryChat Now
Product Details

OVERVIEW

Fiber-press silicone, two-component with mixing rate of catalyst 2%. Low viscosity which can cover the fiber on cotton fleece fabrics to make printing surface super smooth. Some knitted fabrics always appear long fiber on surface. Silicone is much steady than waterbase rubber ink or plastisol ink after curing. So, if the first layer, fiber is not covered well, then it would appear on final printing. So, fiber press silicone is coming out for this special fabrics.


TYPICAL PROPERTY

Code NO.

T-J05Y

Color

Transparent

Durometer - Shore A

33 Shore A

Dynamic Viscosity

130000 Centipoise

Elongation

362 %

Pot Life

36 hours

Shelf Life

360 Days

Solids Content

> 98 %

Specific Gravity @ 25C

0.95

Tear Strength

4.3Mpa

Tensile Strength

1015.3 psi


PACKING  

5kg/barrel; 20kg/barrel


CLEANING

After printing, silicone can be cleaned away from equipment with hydrocarbon based solvent.


PRODUCT DISPLAY

image001(001).jpg


FAQ

1.What is your MOQ?

It depends on customer's exact request.

2.Are you manufactuer or trading company?

We are silicone ink and silicone heat transfer labels manufacturer, but we also do some trading according to customers trust.

3.Where is your main market?

Our main market based in Asian and south America countries where there are more printing factory for garments or shoes.

4.What is your lead time?

Normally in 3~15 days according to order quantity.

5.What is your payment payment ?

T/T, Western Union, PayPal


AFTER SALES

1. Triangle new series of silicone is mixed in rate of A:B=1:1, no need catalyst for curing which is much better to operate and control.

2. Our silicone is workable for both machine and table production which would not block mesh.

3. Heating temperature of our silicone heat transfer stickers is 155~170℃, 15~20 seconds according to different fabrics and thickness.

4. The order we delivered if its not match your request, pls keep it sealed well for replacement.


TRIANGLE SILICONE PRINTING SOLUTION

How to use fiber-press silicone during printing?

Print the first layer without flash cure, then print directly the second layer. If we have heat press equipment, heat press the second layer,  that would be much better effect. If not, print one more layer and flash cure.


Hot Tags: manual hand-printing fiber-press silicone ink, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US