Manual Table Printing Glossy Silicone

Manual Table Printing Glossy Silicone

AB component glossy silicone for custom t-shirt printing. A:B=1:1, easy to mix and print, No need extra curing agent of catalyst. Usually we print glossy silicone on top for 2 layers, if you need more curve effect, left more silicone on screen. Handling of glossy printing is very important. Heat too urgent or leave no enough time for bubble out, it would show easily in silicone with bubble. This silicone bubble would disappear within 20 seconds which is much better for machine production.

Send InquiryChat Now
Product Details

OVERVIEW

AB component glossy silicone for custom t-shirt printing. A:B=1:1, easy to mix and print, No need extra curing agent of catalyst. Usually we print glossy silicone on top for 2 layers, if you need more curve effect, left more silicone on screen. Handling of glossy printing is very important. Heat too urgent or leave no enough time for bubble out, it would show easily in silicone with bubble. This silicone bubble would disappear within 20 seconds which is much better for machine production.


TYPICAL PROPERTY

Code NO.

T-H03

Color

Transparent

Durometer - Shore A

31 Shore A

Dynamic Viscosity

200000 Centipoise

Elongation

520 %

Pot Life

72 hours

Shelf Life

360 Days

Solids Content

> 98 %

Specific Gravity @ 25C

0.95

Tear Strength

4.1Mpa

Tensile Strength

1015.3 psi


PACKING  

5kg/barrel; 20kg/barrel


CLEANING

After printing, silicone ink can be cleaned away from equipment with hydrocarbon based solvent.


PRODUCT DISPLAY

image001(001).jpg


Solution to 3 Printing Issue

1.How to defoam the bubble in glossy silicone ?

Print thinner layer to help bubble out;

Dont heat too urgent, leave some time for leveling after printing finished;

Add 10% bubble-defoaming agent DS-1003 to speed leveling.


2.How to improve adhesion between silicone and fabrics ?

Add enough catalyst to make complete cure during printing;

Test the adhesion for adhesion before bulk production;

Print our adhesive agent 1001 first on waterproof fabrics to improve adhesion.


3.How to solve sticky surface of silicone printing ?

make sure catalyst added enough due to different weather and room temperature;

heat under curing temeperature, usually under 100-120 degree;

avoid to add too much pigment or other addive agent in silicone, this would also affect curing.


Hot Tags: manual table printing glossy silicone, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US