Mould Hot Stamped Metallic Silicone Label

Mould Hot Stamped Metallic Silicone Label

DESCRIPTION The principle of thermal transfer is: using paper or film as a carrier, printing the pattern/text to be printed on the carrier, and then printing the hot melt adhesive (may also be printed with hot melt adhesive according to product requirements). Applying a certain temperature,...

Send InquiryChat Now
Product Details

DESCRIPTION


The principle of thermal transfer is: using paper or film as a carrier, printing the pattern/text to be printed on the carrier, and then printing the hot melt adhesive (may also be printed with hot melt adhesive according to product requirements). Applying a certain temperature, pressure and time, the hot melt adhesive is bonded to the substrate after being heated, and then the carrier is removed, and the ink layer can be separated from the carrier and transferred to the substrate.


Thermal transfer quality focus:


A. The firmness of hot pressing: the product should be firm after hot pressing, and can be judged by hand scraping method. It can also be judged by the washing test method.


B. Easy to turn hot work: After turning hot, the carrier should be easy to tear off. The commonly used carrier is a PET transfer film. It should be noted that there are two kinds of cold tearing and hot tearing. The cold tearing must be turned off after the product is cooled, and the hot tearing can be torn off immediately after the hot pressing.


C. The substrate to be hotned is different, and the properties and specifications of the hot melt adhesive used are different. Therefore, before producing a thermal transfer product, a suitable hot melt adhesive must be selected for the substrate used. Therefore, the customer service staff must know to the customer what material is hot, and try to provide samples.


Turning parameter settings:


A. Time: According to the specific circumstances, the time should be as short as possible to ensure the quality of hot stamping to improve production efficiency.


B. Temperature: Too high may cause problems such as product deformation, and too low, the product is not strong enough.


C. Pressure: It needs to be appropriate, generally suitable for 3-5KG. If it is too big, the product will be deformed. If it is too small, the firmness is not enough.


IMAGE

金银胶.jpg


Hot Tags: mould hot stamped metallic silicone label, China, suppliers, manufacturers, quotation, pricelist, made in China
Related Products
Inquiry
    JOIN US